Water Repellent Detergent - K88 STONE SOAP

Water Repellent Detergent - K88 STONE SOAP

K88 STONE SOAP
K88 STONE SOAP is a Water-repellent detergent for polished natural stone surfaces, concrete and materials such conglomerate (terrazzo floor and similar).


K88 STONE SOAP is a revolutionary concentrated detergent able to give, after washing of the surface, an immediate and extraordinary water repellence, greatly improving resistance to dirt and water, making cleaning easier and maintaining joints cleaner and more protect.

K88 STONE SOAP, even if it’s not a water repellent product with anti-rising characteristics, temporarily reproduces these features, with a super water repellence; thanks to its neutral pH it can be used on different kind of surfaces, even the most delicate ones, without damaging them. The product can be used on floorings like natural stones, marbles, granites, concrete, grits, and this make the product unique for its strengthening of barrier against water ; furthermore, the product does not create unsightly films, does not change the
natural aspect of the surface and does not modify the colour. It can be used both as a ordinary maintainer and as an extraordinary one.

K88 STONE SOAP does not require particular rinsing after using; the washed surface is immediately walkable and protected; the product is ideal also after traditional polishing or after using polishing creams as protective rinsing on the stones materials.

HOW AND WHY TO USE Dilute with water; the product can be used manually (with mop or appropriate equipment), with mono-brush machine, washerdryer machine putting the product directly into the tank. Please remind that a very shine surface will need much less product than the recommended average quantities. First impregnation: 1-1,5 lt of
product for 10 lt of warm water, according to finishing of the floors and kind of surface. Manual cleaning: 0,3-1 lt of product for 10 lt of water. Washer-dryer machine or mono-brush machine: 2-0,7 lt of product for 10 lt of water. Maximum quantity to obtain a very accentuated impregnating effect is a dilution of 1 lt of product into 3 lt of water.

CAUTION: if any eventual oily film will remain on the surface after impregnation or cleaning, it means there is excess of product that can be removed with a further superficial washing with warm water.


PRECAUTIONS The product is afraid of frost. The surface may darken after treatment (normally this happens on
non-treated absorbent stones like limestone), so we always suggest to make a preliminary test to verify compatibility of the product with the surface.

PACKAGING Drum of 5 lt. Box of 3 pcs. Drum of 25 lt
HANDLING AND STORAGE The product must be stored in the original containers, perfectly sealer, at a temperature between 5 and 25°C and shielded from direct sunlight. In these conditions, the product has a selflife of 12 months of the date quoted in the delivery note. If the material has been stored for longer than its recommended selflife, it might still be suitable, but this has to be determined beforehand by performing quality checks on its application-related properties.